Cooldrill toolholder Drilling dia 14 x275 deep in H13...............................16mm Boring bar and Drill Type Cooldrill

16 mm Boring Bar in action.........................................................10 Dia with Cobolt Drill

The Team at Precision Engineer realised that drill holding on none VDI CNC lathes have many shortcomings so

we evolved the Cooldrill toolholder design to correct the problems with normal drill & boring bar holders .

We discovered that we have a unique design and are now manufacturing Cooldrill offering

a very inexpensive route to reducing your costs and increasing profitability.

Cooldrill uses either double angle or ER collets to adjust for drill or boring bar size .

Coolant is then directed through the collet and pressurised.

The whole assembly sits flush in the turret bore to give maximum clearance against the jaws giving :-

* Very fast set up and toolchange times.

* Reduced expensive collisions when faceing and parting off.

* Flood coolant completely covers the drill.

* Range from 3mm to 16 mm using double ER collets in a 40mm dia Turret bore.

* Reduced tool breakage and wear.

* Faster Cycle Times.

* Reduced Tooling Costs.

Cooldrill's sit flush in Z with all your other tools.................Cooldrill 40 (note the old drill socket sitting above the turret face)

Cooldrill has been designed typically for a small machine shop that requires a reliable drilling boring system with much reduced tool inventory costs. It is also time efficient as it frees up machinists time from altering drills and sockets while the machine is at a standstill, allowing for faster set ups and pre-changeover organisation of tools. A leading Lathe Manufacture has confirmed that only 5% of new 2 axis machines are sold with VDI turrets . In reality most old machines would have normal turrets with the majority of external cutting tools never being removed from the turret Cooldrill can save the expense of a VDI turret .

Prices are

Cool drill 40 (40mm dia) with drill backstop £69.0 each.

Cool drill 4012 (40mm dia) for 12mm boring bar £72.0( will take any size drill up to 16 mm)

Cool drill 4016 (40mm dia) for 16mm boring bar £72.0 ( will take any size drill up to 16 mm)

Cooldrill Collet Holder £35.0 or 5 at £30.00 each

Cooldrill spanner £24.

Set of collets ER25 (range from 3 to 16 dia) £105 (contact J&L or WNT for direct prices)

P&P12.0 or free on 2 or more cooldrill's.

Ideally for 1 machine you require 3 cooldrill's,1x Drill stop Cooldrill 1x 12mm Boring Bar Cooldrill,

1x 16mm Boring Bar Cooldrill, 5/10 collet holders with 2 sets of collets and a spanner.

Size range will be Dia 32, 40, 50,

Note prices are without VAT .UK Mainland only. We reserve the right to alter any technical specification.

Patent Applied For

Cooldrill press release here with higher quality photographs

http://www.precisionengineer.co.uk/press%20release%20cooldrill.html

Precision Engineer Ltd, Unit 8b Leighton Centre, Welshpool, Powys, SY21 8HJ

Phone 01938559495 Fax 01938 555514 Email drill@cooldrill.co.uk